As the time of contact with the old beeswax has been getting longer and longer, the number of things that have been used has gradually increased, and different objects have been observed. I am not ashamed to think that I have a deeper understanding of the old beeswax before, with a cautious Sincerely discuss the attitude and meet with you. There is only one purpose: let us walk out of the misunderstanding of old beeswax as much as possible.
One: About ice cracks:
Ice cracking is divided into two aspects:
1 Long-term formation of ice cracks.
The long-term formation of ice cracks is a manifestation of a dehydration and dehydration of beeswax in a long-term dry environment. Why is the ice crack vintage an old feature? Because this process of ice cracking is quite slow, the long-formed ice crack is very fine and very uniform with the slow and gradual infiltration process in a completely natural environment. Cracks are not easily observed without the use of a magnifying glass or a strong light flashlight. This delicate, if not replaced by a number, then each opening film should be around a square millimeter, and some features are expressed in digital form. It is a very bold approach. If someone and I lift the bar, then I admit defeat. .
2 short-term accelerated ice cracks.
The short-term accelerated ice crack is made by using the high temperature constant temperature baking technique for a short time. It is a kind of bursting performance that artificially operates to accelerate dehydration by using constant temperature and high temperature in an unnatural situation. Such a short-time quick ice crack, although it is also a gradual process, greatly speeds up the cracking speed, causing some places to be too late to crack. This ice cracking performance is uneven and large opening, so this short-term crash The ice crack, please allow me to change the name "high temperature burst crack" for short. This type of blasting crack is mostly floating on the surface and can be directly observed with the naked eye.
One of the following problems has arisen. Are all the beeswax with this "burst crack" all baked new beeswax? The answer is not absolute. Some old beeswax will also have such a large opening, but this is a rare type that is very rare. This old beeswax will have other "old" characteristics of old beeswax, and this burst of cracks only appears. In the local, remember to be partial.
In summary, the difference between the long-formed ice crack and the short-time quick ice crack is that it is fine and not delicate, and the difference between uniformity and unevenness is mainly understood by the above several figures.
Two: About the husk (pachet and weathered lines and colors)
The skin is divided into three aspects:
1 weathering pattern
Weathered grain is a performance of beeswax that ruins a vicissitudes of the beeswax shell in the sun and the sun. It smoothes its smooth surface and turns it into a rugged, relatively dark color surface. Most of this uneven surface is invisible to the naked eye. It is composed of dots of different sizes to form a face. Under the mesoscopic view, it looks like a pore. Although my description may not be so vivid, this paragraph is very important for the white just getting started. Of course, there are also more weathering features, which can be seen in the naked eye.
For example, orange peel, similar to orange peel, or pig skin, similar to leather. For the new beeswax that is baked, there is no such weathering pattern. Although it has a skin color similar to that of old beeswax, the surface of the skin is as clean as a mirror, as if it is coated with a film, so that it cannot be seen. To the pores! Of course, the word pore is just a metaphor.
2 patina
The patina is the hand of the long-awaited Capricorn in the long years. The above sentence is from Baidu. I think it is necessary to add a little. Not all the patina is hand-shirt, some wear it, don’t wear it. When you play, you will also form a patina. The patina is delicate and oily, which proves that the old beeswax has a longer life time. However, this has a lot to do with the wearer's habits and hard work, as well as the players' dry hands, oil hands and sweat hands. So this item is only a relative feature, not absolute.
3 colors
The color of the old beeswax is varied. The color mentioned in this title does not refer to the diversity of the color of the old beeswax. It is only a little understanding of the old and new colors of the old beeswax.
The color of the old beeswax, with the long-term inheritance of the play, and the weathering under the long-term natural strip, will have a natural transition from the white to yellow to the red. But this is just a relative expression, or exaggerated, judging the age of the old beeswax from the depth and lightness of the color, just a little suspicion of a small basis. Strictly speaking, it is a bit redundant to write this.
If you judge the age of the old beeswax from the depth and lightness of the color, then the following bead, I said it was the age of Genghis Khan! Who can deny it?
In summary, there is a great relationship between the pulping and the hard work of the hand. The player is a dry hand and a sweaty hand has a great relationship. Whether it is worn or not is also very important, so although palatation is a very important feature, overall, observing whether it is old or not, weathering is more reliable than patina, although both characteristics will appear at the same time. Finally, the patina is more reliable than the color.
Three: About the tunnel
The hole is one of the old features in the old beeswax feature. The following is a talk about the tunnel in six aspects.
1 hole keyhole
The keyhole of the tunnel is played by long-term wear, and the long-term wear of the rope is applied to one side, causing a small small hole on one side of the large tunnel, so that the image forms a "keyhole". It is one of the main manifestations of the old features.
2-hole speaker hole
The hole horn hole is played by long-term wear, and the rope is evenly pressed and worn around for a long period of time, causing the hole of the hole to be larger than the hole in the hole to form a horn. But the bell mouth must be a natural rounded look.
3 hole ice crack
The above-mentioned very fine, very uniform ice cracks appear in the tunnel.
Speaking of the crack in the hole, perhaps someone would ask, why is I an old beeswax, there are ice cracks in the tunnel, but there is no ice crack on the surface? I understand this problem. The formation of ice cracks is a long-term dehydration and dry cracking. The surface of the old beeswax has long-term play, oil and sweat, so it is not easy to crack. The holes are different, and they are not moisturized. Hole ice cracking is an extremely important performance feature in old beeswax.
4 hole weathering
Even if the pores of the old beeswax are not formed into ice cracks, they may not be the virgin colors of the original perforations, and there will be a weathering performance deeper than the color of the period.
5-hole glass light
The glass light of the tunnel is the long-term back-grinding of the rope grinding, and the rope is inadvertently made a polishing process, thereby forming a kind of gloss in the tunnel. However, this item has a considerable relationship with the habit of playing, wearing, and stringing, so this feature is not absolute. (just auxiliary reference)
6 difference between manual punching and machine punching
Strictly speaking, the technique of punching holes a hundred years ago is relatively backward, and they are all drilled by hand. This explains why most of the old beeswax are large holes in the material. But even if the technique of manual punching has not been lost, perhaps some people who are interested in making old beeswax also use manual drilling. For this item, I did not do careful research. However, observing the difference, understanding the internal, can also prevent taking medicine from a certain extent.
In the hole, there is a big hole. In summary, if there is a small hole in the hole without the keyhole and the horn hole, there is no weathering and no ice crack in the hole. We have the right to deny that it is not old beeswax.
Finally, a little advice to all friends who read the text:
We are playing old wax, so the word "old" is one of the most basic standards. If you play old wax, don't deceive yourself. If you don't, you won't enter. Of course, for the characteristics of the old beeswax, we must learn to look at the whole, don't get caught up in one point, and we can't deny it all at all.
Multifunctional fabrics are fabrics with flame retardant and other functions, such as anti-static fabric, anti-acid fabric, Water Oil Repellent Fabric, insect repellent fabric, Anti-uv Fabric etc. These fabrics are mainly used to produce overalls. Different working environments require different functions of work clothes to protect workers from injury. Therefore, we have developed a variety of fabrics to meet the needs of more customers.
Advantages of Multifunctional fabrics:
Better protection than flame retardant fabrics
Adapt to the needs of various industries
Can customize functions according to customer requirements
Packing and shipping:
We use 5mm thickness, 5.5cm inner diameter for professional export of thick paper tubes and customized packaging bags for customers to ensure that customers receive intact finished fabrics.
Application:
Xinke Protective multifunctional fabrics widely used in construction, shipyard, welding, oil, gas and offshore industries etc.
Quality is our culture, with us your money in safe your business in safe!
FAQ
Q : Whats the classification of Flame Retardant Fabric?
A : --Disposable FR fabrics
--Chemical treated FR fabrics
--Inherently FR fabrics
Q : What is the difference between fire retardant and fire resistance?
A: A fire retardant material slows burning across the surface of a combustible substrate. A fire resistive material delays heat penetration through a substrate.
Q: How to ensure your product quality?
A: Xinke protective has wholesome and updated test facilities, Test center has picture and more details. And we can provide the certificates you need.
Q: How to ensure your the delivery time?
A: We have advanced and environmental production line with experienced workers to ensure product delivery time between 20-30 day. And we have running protective fabrics only need 15-20 days. For
example, 330g cotton fr fabric and 7oz cotton nylon fr fabric.
Q:Whats the difference between Inherent Flame Resistance and Treatments?
A:Inherently flame resistant fibers contain an essential characteristic that protects the wearer from an ignition source.Treatments or treated fibers have an applied chemical treatment that changes the original level of flame resistance.Flame resistant garments are generally made from either flame resistant materials such as those made from aramid fibers, melamine fibers, or those treated with flame resistant "FR" treatments such as Ammonia or Heat Cure . FR treatments can Wash Out over time, shorting thelife of the garment.
Q:How do normal fabrics react to ignition?
A:Normal fabrics and garments will burn away from the point of ignition with an increasing rate of flame spread and continue to burn after removal of the ignition source. Normal fabrics will continue to burn until they are extinguished or all flammable material is consumed.
Q:What is the best FR fiber or fabric?
A:There is no perfect flame-resistant fabric system that meets all needs. Each FR fiber or treated fabric has certain properties that, depending on end use requirements,can be either benefits or shortcomings. Blending different fibers attempts to balance these properties for maximum fabric performance.
Q:Is 100% cotton flame resistant?
A:No. In most cases, 100% cotton is flammable. It can ignite and continue to burn after being exposed to an ignition source. Many people understand the burning and melting hazards of nylon and polyester fabrics, but fail to recognize the danger of wearing 100% cotton when exposed to an ignition source. However, cotton can be a good fabric to wear underneath proper FR clothing.
Q:Should I specify the strictest code for all my fabrics, to be safe?
A:No. If you "over specify" by requesting a standard that is higher than necessary, you may end up over treating your fabrics and that can cause problems. Specify only the code that is required.
Q:What about certificates?
A:We issue certificates for all flame retarded fabrics. When you require the fabric to meet a specific fire code, a certificate of flame retardancy is need. Be sure that the certificate you receive actually states specified code. In reality, the certificate maybe just pass a test on another fabric. It is important that you build a relationship and trust your fabric finisher.
Q:Does Xinke charge for testing sample materials?
A:Our internal test are free, we can provide free reports at any time. If a client requires testing by a certified laboratory, Xinke could arrange the testing with a reasonable fee.
Q:How long does testing take?
A:If a client requires our internal test reports, we can provide on the day we receive your sample. If a client requires testing by a certified laboratory, we can give you the reply case by case.
Q:Do you have "Stocked fabric"?
A:yes,we do. We can guarantee that the inventory of conventional
fabrics, in order to shorten the delivery, to provide you with a
better service.
Muti-Functional Fabric,Outdoor Fabric,Inherent Fr Fabric,Fr Resistant Fabrics
Xinxiang Xinke Protective Technology Co, Ltd. , https://www.coverallsuits.com