[China Glass Net] Are you worried about how to remove the insurance label attached to the windshield, although it seems to be a simple job, but it is actually very troublesome, because the paste time is too long, and it has been tested by temperature and sunlight, on the glass. There will always be a lot of residue left to remove, the following method will teach you how to easily clean the windshield annual inspection mark.
First, the physical method
1. Keywords: hair dryer
Simply blow it with a hair dryer for a while, and you can easily tear off the various logos. This method can not only be used to tear the annual inspection mark on the windshield, but also can be widely used to tear the homogenous glue on various appliances, such as the label attached to the newly purchased water cup, the label attached to the eating utensils, and the like.
2, Keywords: electrostatic stickers
What is electrostatic sticker? Simply put, it is very similar to our mobile phone film, but it is slightly larger than the annual inspection mark. You can attach the annual inspection mark to the static electricity sticker, and then stick the static electricity sticker on the windshield, which will be very firm on the one hand. On the one hand, because the electrostatic stickers are not as difficult to tear as the annual inspection signs.
Of course, if you want to save more trouble, you can also use the suction cup sticker. The suction cup sticker is similar to the Superbo frame. We can put the annual inspection mark on the suction cup sticker and then fix the suction cup on the windshield. The suction cup has an advantage over the electrostatic sticker, that is, it can be recycled, which can be said once and for all.
3, Keywords: Handcuffs
Of course, if you don't have a hair dryer or electrostatic stickers in your home, you can also use the pure physical method of handcuffs, but there is a precondition that you can use your hands and dryness in the rainy and humid weather for several days.
Second, the chemical method
1. Keywords: detergent, etc.
For some annual inspection marks that are not strong enough, you only need to use hot water for a while to tear off, but what about the annual inspection mark with strong adhesion? At this time, you need to see if the front windshield has a film. If there is no film, you can use soapy water, washing powder water or even a special chemical to infiltrate the annual inspection mark. If it is wet, it will be better torn.
2. Keywords: gasoline
If the car has been filmed, you can use a small amount of alcohol on the towel to rub it a few times on the annual inspection mark, or remove them. However, you should pay attention to the use of alcohol, try not to splash the alcohol directly on the windshield, otherwise it will easily hurt the car membrane.
3. Keywords: wind oil
Prepare a bottle of wind oil, apply it to the annual inspection mark to be removed with a towel, and thoroughly soak it. After about half an hour, gently wipe it with a towel and repeat it several times.
4, Keywords: toothpaste
Take a toothbrush, squeeze the toothpaste on it, and brush it a few times like a brush to clean it 1000% clean.
5, Keywords: plastic wrap
Spread the detergent (to the original juice, do not dilute with water) evenly behind the label to be removed. Remove a piece of cling film and cover it on the label to cover the label completely. The wrap film will stick to the label on it. Apply slowly on the cling film by hand, and squeeze out the fine air bubbles between the cling film and the label to smooth out. Leave this state for 10 minutes to 20 minutes. After tearing off the wrap film, it will completely carry the label to be removed together, leaving no trace on the glass, and it is extremely efficient. Dry the residual detergent with a damp towel.
Extra Large Nitrile Gloves,Nitrile Mechanics Gloves,Safeguard Nitrile Gloves,Blue Nitrile Gloves
Jiangsu Yijin Import and Export Trade Co., Ltd , https://www.dailysafecare.com